2006 Honda CG125

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear reflector missing (4.8.2 (a) (ii))

Drive chain excessively loose (6.1.7 (c) (i))

Rear Brake component insecure arm (1.1.21 (c))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Drive chain worn but not considered excessive and slightly loose (6.1.7 (c) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced under side by centre stand support (6.1.1 (c) (i))

Drive chain worn but not considered excessive and slightly loose (6.1.7 (c) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced under side by centre stand support (6.1.1 (c) (i))

Rear Stop lamp not working (4.3.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Centre Lower Motorcycle structure slightly corroded (6.1.1a)

registration plate cracked but not insecure

Drive chain sprocket carrier worn to excess (6.2.1e)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Offside Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Rear Tyre fouling another component (4.1.4)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Rear suspension bush has excessive free play (2.4.A2a(i))

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Centre Lower Motorcycle structure slightly corroded (6.1.1a)

registration plate cracked but not insecure

Front Brake fluid reservoir leaking hydraulic fluid (3.2.B1e)

Offside Rear Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Rear Brake pedal is positioned so that the brake cannot be readily applied (3.1.3c)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

number plate light out

No Plate Light Inop

Rear reflector on motorcycle missing (1.4.1)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

No Plate Light Inop

Drive chain worn but not considered excessive (6.2.1e)

Front Drive chain sprocket slightly worn (6.2.1e)

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Drive chain sprocket slightly worn (6.2.1e)