MOT Status
ExpiredMileage
75,515 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Headlamp aim too high (4.1.2 (a))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Brake load sensing valve inoperative but ABS functioning corroded (1.1.17 (c) (i))
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Offside Headlamp insecure (4.1.1 (c))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill holed (5.3.6 (a) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill holed (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill holed (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Exhaust has a minor leak of exhaust gases from every join and clamp (6.1.2 (a))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Windscreen wiper blade defective (3.4 (b) (i))
Offside Headlamp aim too low (4.1.2 (a))
Windscreen washer provides insufficient washer liquid (3.5 (a))
offside rear tyre cracked though age
rear brake hose ferules becoming corroded
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Steering rack gaiter split (2.2.D.2d)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
1 side of exhaust front bracket corroded/broken.
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too low and too far to the right. (1.8)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
font exhaust shield rattles
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Steering rack gaiter split (2.2.D.2d)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
font exhaust shield rattles
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
near side rear cracking on wall
Nearside Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Offside Headlamp aim too high and too far to the left. (1.8)
Exhaust has a minor leak of exhaust gases (7.1.2)
superficial cracking of o/s/r and n/s/r tyre outer walls
How Reliable is the Proton Jumbuck?
Based on 28,247 MOT tests across 1,667 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AU04 GVM is a 2004 Proton Jumbuck in White with a 1,468cc petrol engine. This vehicle has been through 31 MOT tests with a personal pass rate of 54.8%.
Across all 2004 Proton Jumbuck models, the average MOT pass rate is 69.2% with a typical mileage of 50,207 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Proton Jumbuck fails its MOT is steering rack gaiter split, accounting for 1,651 recorded failures. If you're considering buying AU04 GVM, it's worth having these areas checked by a mechanic before committing.
The Proton Jumbuck typically stays on UK roads for around 23 years. At 22 years old, this Proton Jumbuck is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AU04 GVM?
You can check the full history of AU04 GVM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AU04 GVM registered?
AU04 GVM is a 2004 Proton Jumbuck, first registered on 20 April 2004.
Is AU04 GVM safe to buy?
The MOT history for AU04 GVM shows 31 tests with a 54.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AU04 GVM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AU04 GVM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.