2017 Zontes Zt

Exhaust noisy (8.1.1 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear brake drum brake arm is set back further than normal on brake rod, but operates good brake.

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Rear Brake component insecure Reaction bracket rear bolt to back plate incorrect and insecure. (1.1.21 (c))

Rear reflector missing (4.8.2 (a) (ii))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Exhaust noisy (8.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Steering headbearing slightly stiff or notchy slightly notchy (2.2.2 (f) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Wheel alignment slightly misaligned (2.4 (a))

Front Direction indicator obviously incorrectly positioned Mandatory direction indicators must have minimum separation distances between the illuminating surfaces of: solo motorcycles - 240mm at the front (4.4.3 (a))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Rear Footrest missing (6.2.12 (a))

Offside Rear Footrest missing (6.2.12 (a))

Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Rear Suspension arm pin or bush excessively worn frame/swinging arm (5.3.4 (a) (i))

Exhaust noisy (8.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Steering headbearing slightly stiff or notchy slightly notchy (2.2.2 (f) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Wheel alignment slightly misaligned (2.4 (a))

Front Steering headbearing slightly stiff or notchy Slightly notchy (2.2.2 (f) (i))

Rear Drive chain slightly tight (6.1.7 (k) (i))

Rear Exhaust noisy (8.1.1 (a))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement swinging arm/frame (5.3.4 (a) (i))

Rear cush drive rubbers slightly worn

Wheel alignment slightly misaligned (2.4 (a))

Headlamp aim too low (4.1.2 (a))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition silencer (8.1.1 (a))

Headlamp light intensity reduced (4.1.4 (a))

Rear Drive chain slightly loose (6.1.7 (c) (i))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement swinging arm/frame (5.3.4 (a) (i))

Rear cush drive rubbers slightly worn

Wheel alignment slightly misaligned (2.4 (a))

HANDLEBAR TO WHEEL ALIGNMENT SLIGHTLY OUT!

Nearside Rear Direction indicator with a multiple light source more than 1/2 not functioning n/s/r indicator working less than 50% (4.4.1 (a) (ii))

Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii))

HANDLEBAR TO WHEEL ALIGNMENT SLIGHTLY OUT!

COVID-19 6 MONTH EXTENSION