2007 Ford Focus C-max

Brake hose has slight corrosion to ferrule both nearside and offside rear (1.1.12 (f) (i))

Coil spring corroded both rears (5.3.1 (b) (i))

Direction indicator slightly discoloured both fronts (4.4.3 (a))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened both rear lower arms (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both rear trailing arms, inner sill area (5.3.6 (a) (i))

Tyre worn close to legal limit/worn on edge both fronts are on 3mm also wearing heavily on the inner edges (5.2.3 (e))

both headlamp lens deteriorated

engine oil filler cap missing

Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Rear tyre perishing

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Rear wheel bearing rough when rotated (2.6.1)