2003 Honda CB900

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Presented for test with printed image on headlight glass - beam image not affected

Rear Mudguard insecure Secured with cable ties ()

Presented for test with painted image on headlight glass - beam image not affected.

Rear Direction indicator slightly discoloured R & L - Rear indicators showing slightly white light (4.4.3 (a))

Drive chain worn but not considered excessive Has tight spot (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Headlight glass has image on lens - beam pattern not affected

Rear Shock absorber has a slightly worn bush Bottom shock absorber bush has slight play (5.3.2 (c))

Drive chain slightly tight (6.1.7 (k) (i))

Drive chain worn but not considered excessive Has slight tight spot (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Headlight glass has image on lens - beam pattern not affected

Suspension pin, bush or joint worn but not resulting in excessive movement Bottom shock absorber bush has slight up & down play (5.3.4 (a) (i))

Exhaust noisy (8.1.1 (a))

Headlight glass has image on lens - beam pattern not affected

Headlight glass has image on lens - beam pattern not affected

Front Position lamp not working (4.2.1 (a))

Exhaust noisy (8.1.1 (a))

Headlight glass has image on lens - beam pattern not affected

Shock absorber has a light misting of oil L/H fork seal (5.3.2 (b))

Wheel alignment slightly misaligned (2.4 (a))

Rear All direction indicators obviously incorrectly positioned (4.4.3 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Tyre has a tear caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Headlamp masks/converters fitted

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))