2003 Honda VFR800A

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Road spring corroded (5.3.1 (b) (i))

Horn not working (7.7 (a) (ii))

Offside Front Upper Brake hose excessively twisted Routed incorrectly. Fowling/twisting when handlebars turned (1.1.12 (b) (ii))

Offside Rear Lower Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Steering operation restricted in free movement from lock to lock Fowling on brake hose (2.1.4 (c))

Offside Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake fluid below minimum mark (1.1.10 (d) (i))

Nearside Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Road spring corroded (5.3.1 (b) (i))

Exhaust has a minor leak of exhaust gases Gases not blowing onto any component that could melt (6.1.2 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Nearside Front position lamp does not illuminate immediately when switched on (1.1.3a)

Offside Front position lamp incorrect colour (1.1.2a)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Exhaust slightly deteriorated (7.1.1a)

Offside Front Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Exhaust slightly deteriorated (7.1.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))