2012 Honda Cbf 125 M-b

Front Brake binding but not excessively slight front brake bind (1.2.1 (f))

Front Brake binding but not excessively slight front brake bind (1.2.1 (f))

Headlamp aim too high dipped beam too high (4.1.2 (a))

Headlamp insecure headlamp assembly insecure (4.1.1 (c))

Drive chain slightly loose chain slack - near end of adjustment (6.1.7 (c) (i))

Front Brake indicates slight fluctuation of brake effort slight brake effort fluctuation from front brake (1.2.1 (e))

Steering headbearing slightly stiff or notchy slight stiffness in steering operation (2.2.2 (f) (i))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Headlamp insecure headlamp assembly loose (4.1.1 (c))

Brake pad(s) less than 1.0 mm thick (1.1.13 (a))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e))

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Horn not working (1.7.3a)

Rear Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)