MOT Status
ExpiredMileage
98,316 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Floor (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Floor (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened All (5.3.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill middle (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill middle (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Headlamp lens slightly defective Both (4.1.1 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Coil spring corroded Both (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened ALL (5.3.3 (b) (i))
Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill / chassis (6.2.2 (d) (i))
Nearside Rear Nail in tyre ()
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill / chassis (6.2.2 (d) (i))
Rear Coil spring corroded both (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
exhaust deteriorated [flex pipe] and heat shield loose
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Rear reflector missing (4.8.2 (a) (ii))
Oil leaking excessively from engine (8.4.1 (a) (i))
Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill / chassis (6.2.2 (d) (i))
Nearside Rear Nail in tyre ()
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill / chassis (6.2.2 (d) (i))
Rear Coil spring corroded both (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
exhaust deteriorated [flex pipe] and heat shield loose
Central Exhaust system insecure (6.1.2 (a))
Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Advise Engine Management Light on!
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Suspension component mounting prescribed area is corroded but not considered excessive nearside and offside inner sills (2.4.A.3)
Front registration plate delaminated Also plate broken in two (6.3.1d)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure sidewall perished/split (4.1.D.1b)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Advise Engine Management Light on!
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Suspension component mounting prescribed area is corroded but not considered excessive nearside and offside inner sills (2.4.A.3)
Nearside Front tyre worn on inner edge
Nearside non obligatory mirror insecure
Offside tyre worn on inner edge
front undershield low
osf tyre wearing on inner edge
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
front undershield low
osf tyre wearing on inner edge
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Inner Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Inner Front Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Inner Front Tyre worn close to the legal limit (4.1.E.1)
Offside Inner Front Tyre worn close to the legal limit (4.1.E.1)
Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AO06 WKC is a 2006 Mazda 3 in Black with a 1,598cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 65.2%.
Across all 2006 Mazda 3 models, the average MOT pass rate is 74.6% with a typical mileage of 70,278 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying AO06 WKC, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 20 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AO06 WKC?
You can check the full history of AO06 WKC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AO06 WKC registered?
AO06 WKC is a 2006 Mazda 3, first registered on 31 May 2006.
Is AO06 WKC safe to buy?
The MOT history for AO06 WKC shows 23 tests with a 65.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AO06 WKC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AO06 WKC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.