2006 Mazda 3

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corroded (6.2.2 (d) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corroded (6.2.2 (d) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Front Shock absorbers has a reduced damping effect Nearside & Offside (5.3.2 (d))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Front Shock absorbers has a reduced damping effect Nearside & Offside (5.3.2 (d))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Shock absorbers has a reduced damping effect Nearside & Offside (5.3.2 (d))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Shock absorbers has a reduced damping effect Nearside & Offside (5.3.2 (d))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Mid exhaust hanger broken

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear subframe very rusty

Front Registration plate inscription illegible (0.1 (b))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Mid exhaust hanger broken

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear subframe very rusty

Front front no plate peeling and filled with water

Nearside Rear outer sill starting to corrode

Offside Rear Outer sill starting to corrode

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Inner brake pads low

Central exhaust mount broken

Front number plate discoloured

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear sub frame corroded

dampness around steering rack

vehicle filler neck corroded - under side corroding

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

vehicle filler neck corroded - under side corroding

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm inner edge (4.1.E.1)

Registration plate lamp not working (1.1.C.1d)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Rear Exhaust system not adequately supported (7.1.1)

Nearside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

both front tyre valves perished slightly.

Centre Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Front registration plate insecure (6.3.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)