2004 Honda CB600

Rear Stop lamp not working (4.3.1 (a) (ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e))

Chain guard missing ()

Rear Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Rear reflector on motorcycle missing (1.4.1)

Chain guard missing ()

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Brake pedal is damaged but the brake can still be readily applied Slightly bent (3.1.3c)

Tyre valve stem slightly damaged Rear tyre valve is perished, would advise replacement before condition worsens. (4.1.2c)

Direction indicator deteriorated and function impaired (1.5.3a)

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Small piece of metal in rear tyre

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

not all rear winker led s work

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

not all rear winker led s work

Wheel damaged but not significantly reducing the original strength (4.2.1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Chain guard missing

Chain guard missing

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Nearside Rear Direction indicator not working (1.5.1c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))