2003 Honda SES125

Front Wheel bearing has slight play (5.1.3 (a) (i))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Brake excessively binding (1.2.1 (f))

Rear Brake lever insecure Pivot bolt has no locknut and is nearly out of its hole. (1.1.2 (e) (i))

Rear Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Nail in tyre Screw in tyre, was inflated prior to MOT test. ()

Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear reflector obviously incorrectly positioned Obscured by 'L' pLate (4.8.2 (a) (i))

Rear tyre valve slightly cracked

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Motorcycle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) DANGEROUS

Rear Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Nail in tyre ()

Rear Position lamp insecure (4.2.1 (c) (i))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Stop lamp not working front switch n/w (4.3.1 (a) (ii))

Offside Rear Shock absorber has a light misting of oil (5.3.2 (b))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Stop lamp remains on when the brake is released (1.3.1e)

Steering movement slightly 'notchy' (2.2.1b)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Direction indicator incorrect colour (1.5.1b)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Stop lamp remains on when the brake is released (1.3.1e)

Rear Direction indicator damaged but function not impaired (1.5.3a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))