2003 Honda SES125

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake excessively binding (1.2.1 (f))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

All direction indicators slightly discoloured (4.4.3 (a))

Horn not working (7.7 (a) (ii))

Rear Tyre has ply or cord exposed (5.2.3 (d) (ii)) DANGEROUS

All direction indicators slightly discoloured (4.4.3 (a))

Rear Direction indicator slightly discoloured both (4.4.3 (a))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Front Brake fluid reservoir fluid level low (3.2.B1d)

RHR indicator colour fading

Wheel alignment slightly misaligned. (2.5.1)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake fluid reservoir fluid level low (3.2.B1d)

RHR indicator colour fading

Wheel alignment slightly misaligned. (2.5.1)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake disc(s) is excessively distorted (3.2.A1m)

Front Floor brake test indicates a severely grabbing brake (3.3.C2d)

Rear Tyre has a lump caused by separation or partial failure of its structure (4.1.2a(ii))

Front Wheel alignment slightly misaligned. (2.5.1)

coolant level low

Nearside Rear spring corroded but not seriously weakened (2.4A1b(ii))

Offside Rear spring corroded but not seriously weakened (2.4A1b(ii))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Roller brake test indicates a binding brake (3.3.A1a)

Stop lamp remains on when the brake is released (1.3.1e)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Nearside Rear spring corroded but not seriously weakened (2.4A1b(ii))

Offside Rear spring corroded but not seriously weakened (2.4A1b(ii))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))