2003 Honda NSR125

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Exhaust noisy (7.1.2)

Front Floor brake test indicates a binding brake (3.3.C2c)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Exhaust markings indicating not for road use or similar wording (7.1.4)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Exhaust slightly deteriorated (7.1.1a)

Offside Rear suspension bearing has slight free play (2.4.A2a(i))

Rear Tyre valve stem slightly damaged (4.1.2c)

Steering headbearing has slight free play (2.2.2)

Wheel alignment slightly misaligned. (2.5.1)

front and rear tyre has a plug in

one of two front bulbs working

Centre Upper An item not tested (Manual)

Front Brake lever cannot be applied smoothly (3.1.3d)

Rear Brake pedal cannot be released smoothly (3.1.3d)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Throttle operating incorrectly (6.2.1f)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Exhaust slightly deteriorated (7.1.1a)

Offside Rear suspension bearing has slight free play (2.4.A2a(i))

Rear Tyre valve stem slightly damaged (4.1.2c)

Steering headbearing has slight free play (2.2.2)

Wheel alignment slightly misaligned. (2.5.1)

front and rear tyre has a plug in

one of two front bulbs working

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Nearside Rear Drive chain sprocket slightly worn (6.2.1e)

Front Horn missing (1.7.1)

Nearside Rear Drive chain excessively loose (6.2.1d)

Rear Rear suspension bearing has excessive free play (2.4.A2a(i))

Rear Rear suspension bush has excessive free play (2.4.A2a(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Nearside Rear Drive chain sprocket slightly worn (6.2.1e)

Front Front suspension has excessive stiffness in the suspension movement. (2.3.6b)

Rear Brake locking device insecure (3.2.A1e)

Rear Drive chain excessively tight (6.2.1d)

Rear Rear wheel has a missing wheel nut(s) (4.2.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c)

Front Brake lever has inadequate reserve travel (3.1.3b)

Front Fairings insecure and likely to impede the steering (2.1.2e)

Front Front suspension has inadequate damping effect. (2.3.6c)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Rear wheel rotation likely to be impeded (6.2.1b)

Rear Stop lamp remains on when the brake is released (1.3.1e)