2003 Honda SES125

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake lever pivot excessively worn (1.1.1 (b))

Front Position lamp not working (4.2.1 (a))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Front Stop lamp switch with a delay in operation Does not work all of the time. (4.3.2 (a) (ii))

Rear Brake excessively binding (1.2.1 (f))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Rear Brake lever pivot excessively worn (1.1.1 (b))

Rear Rear reflector missing (4.8.2 (a) (ii))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear Valve stem seriously damaged (5.2.3 (j))

Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii))

Rear Brake binding but not excessively (1.2.1 (f))

front tyre sidewall cracking

Rear Brake excessively binding (1.2.1 (f))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

front tyre sidewall cracking

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre is unsuitable (4.1.1)