MOT Status
ExpiredMileage
138,339 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front brake disc slightly pitted (3.5.1h)
Nearside Front front brake juddering slightly (3.7.A.2b)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front brake disc slightly pitted (3.5.1h)
Offside Front front brake juddering slightly (3.7.A.2b)
underside surface corrosion
Nearside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front brake disc slightly pitted (3.5.1h)
Nearside Front front brake juddering slightly (3.7.A.2b)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front brake disc slightly pitted (3.5.1h)
Offside Front front brake juddering slightly (3.7.A.2b)
underside surface corrosion
Brake pedal spongy (3.3.B.1b) DANGEROUS
Emissions not tested (7.0)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Headlamp aim too low (1.8)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear front brake recording little or no effort (3.7.B.5a)
Offside Front Headlamp aim too low (1.8)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brake pipe inadequately clipped (3.6.B.1)
Rear Registration plate lamp not working (1.1.5c)
Service brake: efficiency below requirements (3.7.B.7)
Offside Rear front brake recording little or no effort (3.7.B.5a) DANGEROUS
underside corrosion
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front brake disc slightly pitted (3.5.1h)
Nearside Front front brake juddering slightly (3.7.A.2b)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front brake disc slightly pitted (3.5.1h)
Brake pipe excessively corroded (3.6.B.2c)
Centre Exhaust mounting missing (7.1.1b)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front brake disc excessively pitted (3.5.1h)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Direction indicator not working (1.4.A.2c)
Offside Front brake disc excessively pitted (3.5.1h)
Offside Side repeater not working (1.4.A.2c)
Offside front brake binding (3.7.B.1)
Offside rear brake binding (3.7.B.1)
Parking brake: efficiency below requirements (3.7.B.7)
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Windscreen wiper blade deteriorated (8.2.2)
Offside Rear Fluid suspension unit leaking (2.4.D.2)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Windscreen washer provides insufficient washer liquid (8.2.3)
Centre Front Exhaust has part of the system excessively deteriorated (7.1.1a)
Nearside Inner Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Outer Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear rear brake binding (3.7.B.1)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Inner Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Outer Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the BMW 316?
Based on 1,210,990 MOT tests across 108,989 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
ANZ 9383 is a 1992 BMW 316 in Silver with a 1,596cc petrol engine. This vehicle has been through 8 MOT tests with a personal pass rate of 37.5%.
Across all 1992 BMW 316 models, the average MOT pass rate is 63.4% with a typical mileage of 122,211 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a BMW 316 fails its MOT is brake pipe excessively corroded, accounting for 71,150 recorded failures. If you're considering buying ANZ 9383, it's worth having these areas checked by a mechanic before committing.
The BMW 316 typically stays on UK roads for around 38 years. At 34 years old, this BMW 316 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of ANZ 9383?
You can check the full history of ANZ 9383 by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was ANZ 9383 registered?
ANZ 9383 is a 1992 BMW 316, first registered on 13 March 1992.
Is ANZ 9383 safe to buy?
The MOT history for ANZ 9383 shows 8 tests with a 37.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does ANZ 9383 have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on ANZ 9383. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.