MOT Status
ExpiredMileage
135,476 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front front brake fluctuating, but not excessively (3.7.B.3)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Body has slight corrosion (6.1.B.2)
Nearside Front Suspension weakened but no possibility of the body or a component fouling a road wheel (2.4.A.1b)
Nearside Rear Axle beam has slight vertical movement between stub axle and axle beam (2.5.A.1a)
Nearside Rear Body has slight corrosion (6.1.B.2)
Nearside Rear Suspension weakened but no possibility of the body or a component fouling a road wheel (2.4.A.1b)
Offside Front Body has slight corrosion (6.1.B.2)
Offside Front Suspension weakened but no possibility of the body or a component fouling a road wheel (2.4.A.1b)
Offside Rear Axle beam has slight vertical movement between stub axle and axle beam (2.5.A.1a)
Offside Rear Body has slight corrosion (6.1.B.2)
Offside Rear Suspension weakened but no possibility of the body or a component fouling a road wheel (2.4.A.1b)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
underside rusty
Centre brake light not working
Front registration plate deteriorated but not likely to be misread (6.3.1d)
General surface corrosion under vehicle
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)
Under-trays fitted obscuring some underside components
Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Registration plate lamp not working (1.1.C.1d)
Centre brake light not working
Front registration plate deteriorated but not likely to be misread (6.3.1d)
General surface corrosion under vehicle
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)
Slight damage to both front tyres outer sidewalls
Under-trays fitted obscuring some underside components
Engine covers fitted obscuring some components in the engine bay
Nearside Front Road wheel slightly damaged (4.2.A.1a)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Road wheel slightly damaged (4.2.A.1a)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Under-trays fitted obscuring some underside components
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
n/s and o/s lower shock absorber bolt has washer missing
o/s rear tyre perished
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Rear Exhaust system not adequately supported (7.1.1)
Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Engine covers fitted obscuring some components in the engine bay
Nearside Front Road wheel slightly damaged (4.2.A.1a)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Road wheel slightly damaged (4.2.A.1a)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Under-trays fitted obscuring some underside components
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
n/s and o/s lower shock absorber bolt has washer missing
o/s rear tyre perished
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)
Rear Exhaust system not adequately supported (7.1.1)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Brake hose excessively damaged (3.6.B.4d)
Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)
Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Child seat fitted not allowing full inspection of adult belt
Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AJ52 UHD is a 2003 Mazda 6 in Silver with a 2,261cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 64.7%.
Across all 2003 Mazda 6 models, the average MOT pass rate is 71.6% with a typical mileage of 83,392 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying AJ52 UHD, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 23 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AJ52 UHD?
You can check the full history of AJ52 UHD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AJ52 UHD registered?
AJ52 UHD is a 2003 Mazda 6, first registered on 14 January 2003.
Is AJ52 UHD safe to buy?
The MOT history for AJ52 UHD shows 17 tests with a 64.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AJ52 UHD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AJ52 UHD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.