2006 Suzuki SV1000

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Offside Footrest insecure (6.2.12 (a))

Rear Brake pedal insecure (1.1.2 (e) (i))

Rear Brake pedal pivot excessively tight (1.1.1 (a))

Registration plate does not conform to the specified requirements (0.1 (d))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Registration plate incorrect (0.1 (c))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Rear reflector obviously incorrectly positioned (4.8.2 (a) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Rear Direction indicator obviously incorrectly positioned (4.4.3 (a))

Registration plate incorrect (0.1 (c))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Rear reflector obviously incorrectly positioned (4.8.2 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Drive chain slightly loose (6.2.1d)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Drive chain slightly loose (6.2.1d)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Stop lamp does not illuminate immediately a brake applies wires were disconnected (1.3.1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Rear wheel bearings have excessive free play (2.4.A.2c)

Centre Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Offside Front Upper Horn not working (1.7.3a)

Nearside Front Lower Front shock absorber seal failed and leaking oil (2.3.3)