2010 Mitsubishi L200

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Central Exhaust mounting defective snapped off (6.1.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Front Upper Suspension arm ball joint has slight play both sides (5.3.4 (a) (i))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Tyre worn close to legal limit/worn on edge both rears on limit of 1.6mm (5.2.3 (e))

Brake pipe corroded, covered in grease or other material all corroded , x6 pipes (1.1.11 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Tyre worn close to legal limit/worn on edge both on 2mm (5.2.3 (e))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Tyre worn close to legal limit/worn on edge on 3mm (5.2.3 (e))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))