2009 Yamaha WR125X

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake binding but not excessively (1.2.1 (f))

Front Tyre worn close to the legal limit (5.2.3 (e))

Headlamp aim too low (4.1.2 (a))

Rear Brake binding but not excessively (1.2.1 (f))

Rear reflector missing (4.8.2 (a) (ii))

Exhaust noisy (8.1.1 (a))

Front Brake hose too long

Rear Lower Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake hose excessively twisted wrapped around forks and rubbing on wheel (1.1.12 (b) (ii))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Exhaust noisy (8.1.1 (a))

Nearside Front Clutch lever shortened broken (6.2.7 (b))

Rear Lower Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake grabbing severely front brake is grabbing on application (1.2.1 (c))

Front Headlamp aim too high headlight too high (4.1.2 (a))

Front Headlamp insecure headlight is insecure (4.1.1 (c))

Front Headlamp not working on main beam main beam not working (4.1.1 (a) (ii))

Rear Position lamp not working rear light not working (4.2.1 (a))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps number plate light not working (4.7.1 (b) (ii))

Rear Shock absorber has negligible damping effect rear suspension unit has no damping (5.3.2 (b))

Rear Suspension component pin or bush excessively worn bottom suspension pins worn (5.3.4 (a) (i))

Rear Suspension component pin or bush excessively worn rear shock mounting worn excessively (5.3.4 (a) (i))

Riders seat insecure seat is insecure (6.2.5 (a) (ii)) DANGEROUS

Rear Drive chain slightly loose chain is loose (6.1.7 (c) (i))

Horn not working (7.7 (a))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Exhaust noisy (8.1.1 (a))

Front brake pipe excessively long-risk of snagging.

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Rear Exhaust noisy

Rear Rear mono-shock pivot worn but not excessive (2.4.B.4)

Rear chain and sprocket slight worn

Chain guard missing

Exhaust noisy (7.1.2)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Motorcycle structure slightly corroded (6.1.1a)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Roller brake test indicates a slightly juddering brake (3.3.A1b)

Rear position lamp slightly discoloured (1.1.2b)

Clutch lever shortened. (6.2.1g)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear reflector on motorcycle missing (1.4.1)

Clutch lever shortened. (6.2.1g)

Front Brake disc(s) slightly scored (3.2.A1l)

Rear Brake disc(s) slightly scored (3.2.A1l)

gear lever bent

no chain guard fitted at time of test

offside bodywork broken but not insecure

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Registration plate margin less than the minimum requirement (6.3.4g)

Rear Registration plate with character(s) which are not the correct height (6.3.4a)

Rear Registration plate with character(s) which are not the correct width (6.3.4a)

Steering headbearing has excessive free play (2.2.2)

Clutch lever shortened. (6.2.1g)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))