2016 Piaggio Typhoon 125

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Lower Shock absorber slightly loose mounting bolt can be turned but bolt and nut tight (5.3.2 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Wheel alignment slightly misaligned (2.4 (a))

some panels damaged and zip tied together

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake binding but not excessively (1.2.1 (f))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Lower Shock absorber slightly loose mounting bolt can be turned but bolt and nut tight (5.3.2 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Wheel alignment slightly misaligned (2.4 (a))

some panels damaged and zip tied together

very little reverse travel on rear brake

Rear Shock absorber has a light misting of oil (5.3.2 (b))

oil leak

Rear Lower Shock absorber insecurely attached mounting bolt loose (5.3.2 (a) (i))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Steering operation linkage fouling when handlebars turned from lock to lock no lock stop on right lock (2.1.4 (a))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Shock absorber has a light misting of oil (5.3.2 (b))

Registration plate deteriorated but not likely to be misread (0.1 (b))

oil leak