2009 Yamaha YBR125

Central Front Fork yoke insecure (2.2.2 (d) (i))

Central Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Brake clevis joint insecure (1.1.15 (c))

Chain guard missing ()

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Chain guard missing ()

Front Shock absorber has a light misting of oil (5.3.2 (b))

Drive chain excessively tight (6.2.1d)

Rear Roller brake test indicates a severely grabbing brake (3.3.A1b)

Nearside Rear drive chain guard missing

rear brake noisey on application requires further investigation

Rear Roller brake test indicates a severely grabbing brake (3.3.A1b)

Nearside Rear drive chain guard missing

Rear Drive chain slightly loose (6.2.1d)

rear brake noisey on application requires further investigation

Nearside Non obligatory mirror damaged ()

Centre Exhaust is leaking and excessively noisey (7.1.1b)

Floor brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.C1b)

Front Floor brake test indicates a sticking brake (3.3.C2c)

Headlamp aim so that beam "kick up" is not visible on the screen (1.6.B.1)

Offside Footrest missing rubber is missing (6.2.1a)

Nearside Non obligatory mirror damaged ()

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Slight front brake bind noticed at time of test