2003 Kia Carens

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Undertray likely to become detached (6.2.1 (a) (ii)) DANGEROUS

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Tyre worn close to the legal limit both (4.1.E.1)

Battery insecure (1.9.1)

Brake pedal creeps down when held under pressure (3.3.B.1a)

Front Headlamp aim beam image obviously incorrect both (1.8.A.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Tyre worn close to the legal limit both (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Centre Rear Seat belt flexible stalk damaged but not likely to lead to failure under load (5.2.4a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

front brake discs have surface corrosion

Brake pipe excessively corroded (3.6.B.2c)

Centre Statutory seat belt missing (5.1.1)

Offside Stop lamp not working (1.2.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.C.1d)

Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Parking brake lever has little reserve travel (3.1.6b)

front brake fluctuating, but not excessively (3.7.B.3)

Child seat fitted not allowing full inspection of adult belt

Offside Front Anti-roll bar ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

front wipers smeary

n/s rear outer sill corroded

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Child seat fitted not allowing full inspection of adult belt

Offside Front Anti-roll bar ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

front wipers smeary

n/s front tyre on 2mm bald on both edges and perished

n/s rear outer sill corroded

o/s front tyre perished and bald inner edge

Child seat fitted not allowing full inspection of adult belt

Offside Headlamp aim too high (1.8)

Child seat fitted not allowing full inspection of adult belt

Nearside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)