2013 Mitsubishi Outlander

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

rear subframe rusty

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

rear subframe rusty

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

exhaust pipe getting rusty

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

exhaust pipe getting rusty

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Within the rear trailing arm mounting prescribed area (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Within the rear trailing arm mounting prescribed area (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen damaged but not adversely affecting driver's view Stone chip (3.2 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge Worn to 2mm 225.55.18.V (5.2.3 (e))

Windscreen damaged but not adversely affecting driver's view Stone chip in zone A (3.2 (a) (i))

Brake pad(s) wearing thin Both rear brake pads are wearing close to their wear sensors (1.1.13 (a) (ii))

Front Undertray not fully secure (8.1.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Windscreen wiper blade defective (3.4 (b) (i))

Fluid leak, but not excessive transfer box (8.4.1 (a) (i))

Central Rear Stop lamp not working (1.2.1b)

Nearside Front Brake pad(s) less than 1.5 mm thick Inner (3.5.1g)

Nearside Front Tyre worn close to the legal limit Outside edge smooth (4.1.E.1)

Offside Front Tyre worn close to the legal limit Outside edge smooth (4.1.E.1)

Front position lamp(s) not working both front (1.1.A.3b)