2013 Mitsubishi L200

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Front Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Suspension spring mounting prescribed area is corroded but not considered excessive anchor mountings (5.3.6 (a) (i))

Rear Suspension spring mounting prescribed area is corroded but not considered excessive shackle mountings (5.3.6 (a) (i))

Rear Towbar component corroded, but not excessively (6.1.6 (a))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Towbar component corroded, but not excessively (6.1.6 (a))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Oil leak, but not excessive slight oil leak from gearbox (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Oil leak, but not excessive slight oil leak from gearbox (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Tyre worn close to legal limit/worn on edge 4mm edges worn and perished/cracked (5.2.3 (e))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge 4mm edges worn and perished/cracked (5.2.3 (e))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front brake disc worn, pitted or scored, but not seriously weakened x 2 (3.5.1i)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened x 2 (3.5.1i)