2012 Piaggio Fly 125

Front Brake lever is bent and the brake cannot be readily applied (1.1.2 (d))

Suspension arm pin or bush excessively worn all (5.3.4 (a) (i))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Handlebar mounting so insecure that steering is adversely affected (2.2.1 (a) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Indicator switch slightly stiff

Rear Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Brake excessively binding (1.2.1 (f))

Front Brake lever has insufficient reserve travel (1.1.2 (a))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Brake lever pivot excessively worn (1.1.1 (b))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))