2006 Honda SCV100

Headlamp aim not tested (4.1.2 (b))

Headlamp insecure (4.1.1 (c))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Rear Position lamp not working (4.2.1 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

All direction indicators flashing more than 120 times a minute would benefit from new flasher unit (4.4.4 (a))

Front tyre worn unevenly

Handlebar deformed but serviceable slightly misaligned (2.2.1 (c) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

engine idle too fast

engine oil leak

front & rear brake levers have play in pivots

starter motor noisy

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Rear Tyre worn close to the legal limit (5.2.3 (e))

rear brake would benefit from adjustment

Front tyre worn unevenly & has thorns in tread area

Front wheel bearings are slightly rough (2.3.5b)

surface corrosion in front suspension

Front tyre worn unevenly & has thorns in tread area

Front wheel bearings are slightly rough (2.3.5b)

Horn not working (1.7.3a)

surface corrosion in front suspension

exhaust corroded

front tyre wearing unevenly

surface corrosion in front shock-absorbers

Front wheel bearings are excessively rough (2.3.5b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Stop lamp remains on when the brake is released (1.3.1e)

front side light inoperative

main stand bent

Exhaust mounting deteriorated. (7.1.1.c)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front suspension has excessive stiffness in the suspension movement. (2.3.6b)

Exhaust mounting deteriorated. (7.1.1.c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

front tyre worn uneven and perished.

rear brake would benefit from adjustment.

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Registration plate has a feature which changes the appearance or legibility of the characters (6.3.4c)