2006 Derbi Senda Sm

Chain guard missing

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear drive chain loose

Direction indicator not working front rear rh not working (4.4.1 (a) (ii))

Front Stop lamp not working (4.3.1 (a) (ii))

Horn not working (7.7 (a))

Riders seat with a defective supporting structure (6.2.5 (a) (i))

Rear chain drive lose

front and rear sprokets worn

Rear Drive chain excessively tight (6.1.7 (k) (i))

Rear Suspension arm pin or bush likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Exhaust silencer insecure (8.1.1 (b) (i))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Front Shock absorber has negligible damping effect (5.3.2 (b))

Rear Lower Suspension component pin or bush excessively worn linkage (5.3.4 (a) (i))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Stop lamp not working (4.3.1 (a) (ii))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

rear tyre has slight surface cracks and rear wheel bearings have a very small amount of movement

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

rear tyre has slight surface cracks and rear wheel bearings have a very small amount of movement

Exhaust noisy (7.1.2)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Drive chain slightly tight (6.2.1d)

Drive chain excessively loose (6.2.1d)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Rear suspension bush has excessive free play (2.4.A2a(i))