2005 Honda CG125

Rear Tyre worn close to the legal limit (5.2.3 (e))

Nearside Rear Shock absorber has negligible damping effect (5.3.2 (b))

Offside Rear Shock absorber has negligible damping effect (5.3.2 (b))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear reflector missing (4.8.2 (a) (ii))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Headlamp not working on main beam (4.1.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Drive chain worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn to excess (6.2.1e)

Rear Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Drive chain worn to excess (6.2.1e)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Drive chain sprocket worn to excess (6.2.1e)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front shock absorber seal failed and leaking oil (2.3.3)

Rear Drive chain sprocket worn to excess (6.2.1e)

LEFT FOOT REST RUBBER SPLIT

Brake pedal cannot be released smoothly (3.1.3d)

Headlamp aim too high (1.6)

LEFT FOOT REST RUBBER SPLIT

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Wheel has a slightly distorted bead rim. (4.2.2)