MOT Status
ExpiredMileage
190,869 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Tyre worn close to legal limit/worn on edge both front (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Front Tyre worn close to legal limit/worn on edge both front (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
advise handbrake travel
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Battery insecure and likely to cause a short circuit (4.13 (a) (ii))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Brake pipe corroded, covered in grease or other material under bonnet x2 (1.1.11 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Brake pipe corroded, covered in grease or other material under bonnet x2 (1.1.11 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
headlamps faded
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Engine mounting damaged but not to excess (6.1.8 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp lens seriously defective (4.1.1 (b) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Engine mounting damaged but not to excess (6.1.8 (a) (i))
Offside Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
headlights perished
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
headlights perished
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Headlamp aim too high (1.8)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
offside rear tyre perished
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
offside rear tyre perished
Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
catalytic convertor heatshield loose
front tyres worn on edges slightly
Nearside Headlamp aim too high (1.8)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
How Reliable is the Honda Cr-v?
Based on 4,177,643 MOT tests across 304,403 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AE02 LYO is a 2002 Honda Cr-v in Silver with a 1,998cc petrol engine. This vehicle has been through 33 MOT tests with a personal pass rate of 66.7%.
Across all 2002 Honda Cr-v models, the average MOT pass rate is 73.6% with a typical mileage of 93,596 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Honda Cr-v fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 62,925 recorded failures. If you're considering buying AE02 LYO, it's worth having these areas checked by a mechanic before committing.
The Honda Cr-v typically stays on UK roads for around 29 years. At 24 years old, this Honda Cr-v is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AE02 LYO?
You can check the full history of AE02 LYO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AE02 LYO registered?
AE02 LYO is a 2002 Honda Cr-v, first registered on 14 March 2002.
Is AE02 LYO safe to buy?
The MOT history for AE02 LYO shows 33 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AE02 LYO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AE02 LYO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.