2003 Ford Transit

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/step (6.1.1 (c) (i))

Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced centre sill (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))

Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near spring mounting (5.3.6 (a) (i))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake prescribed area is corroded but not considered excessive chassis (1.1.21 (e) (i))

Offside Front Brake pipe corroded, covered in grease or other material under bonnet (1.1.11 (c))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge wearing on inner edge strong advise (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Rear Brake pipe corroded, covered in grease or other material across axle (1.1.11 (c))

both rear suspension bump stops missing

hand brake light not working

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis under bonnet (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing (5.3.6 (a) (i))

Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner and outer sill (6.2.2 (d) (i))

Nearside Rear Brake prescribed area is corroded but not considered excessive chassis (1.1.21 (e) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material under bonnet (1.1.11 (c))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge wearing on inner edge strong advise (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Rear Brake pipe corroded, covered in grease or other material across axle (1.1.11 (c))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

both rear suspension bump stops missing

centre box on exhaust deteriorated

hand brake light not working

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is inadequately repaired chassis (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/arch (5.3.6 (a) (i))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis under bonnet (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner and outer sill (6.2.2 (d) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material under bonnet (1.1.11 (c))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge wearing on inner edge strong advise (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

both rear suspension bump stops missing

centre box on exhaust deteriorated

hand brake light not working

Brake load sensing valve stiff (1.1.17 (c) (ii))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive inner wing/chassis under bonnet (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear floor/wheel arch

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge wearing on inner edge (5.2.3 (e))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear floor/wheel arch corroded

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Rear Brake pipe corroded, covered in grease or other material on axle (1.1.11 (c))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

both rear suspension bump stops missing

centre box on exhaust deteriorated

hand brake light not working

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Offside Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Brake load sensing valve stiff (1.1.17 (c) (ii))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive inner wing/chassis under bonnet (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear floor/wheel arch

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge wearing on inner edge (5.2.3 (e))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear floor/wheel arch corroded

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Rear Brake pipe corroded, covered in grease or other material on axle (1.1.11 (c))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

both rear suspension bump stops missing

centre box on exhaust deteriorated

hand brake light not working

Front brake disc worn, pitted or scored, but not seriously weakened strong advise on both (3.5.1i)

Nearside Front Inner Body has slight corrosion wing (6.1.B.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Body has slight corrosion floor/wheel arch (6.1.B.2)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Outer Body has slight corrosion sill (6.1.B.2)

Offside Rear Body has slight corrosion floor/wheel arch (6.1.B.2)

Rear Brake pipe slightly corroded on axle (3.6.B.2c)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

both rear suspension bump stops missing

exhaust centre box showing slight deterioration

hand brake light not working

rear brake fluctuating, but not excessively both (3.7.B.3)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)

Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing (6.1.B.2)

Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Offside Rear Outer Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)

Rear registration plate deteriorated (6.3.1d)

Front brake disc worn, pitted or scored, but not seriously weakened strong advise on both (3.5.1i)

Nearside Front Inner Body has slight corrosion wing (6.1.B.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Outer Body has slight corrosion sill (6.1.B.2)

Rear Brake pipe slightly corroded on axle (3.6.B.2c)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

both rear suspension bump stops missing

exhaust centre box showing slight deterioration

hand brake light not working

rear brake fluctuating, but not excessively both (3.7.B.3)

Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pipe slightly corroded on axle (3.6.B.2c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

centre box on exhaust deteriorated

hand brake light not working

Nearside Rear Suspension spring mounting prescribed area is excessively corroded valance (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded valance (2.4.A.3)

Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pipe slightly corroded on axle (3.6.B.2c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

centre box on exhaust deteriorated

hand brake light not working

Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

hand brake light not working

Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis (2.4.A.3)

Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

hand brake light not working

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

exhaust both silencers have corrosion but not leaking

both front tyres show signs of age deteriation (cracking)

Oil leak

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Registration plate lamp not working (1.1.C.1d)

Oil leak

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

n/s/f tyre showing slight deteriation

n/s/r tyre showing slight deteriation

o/s/f tyre wearing on inner edge

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)