2005 Honda Cbr

Front Headlamp aim too high (4.1.2 (a))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Exhaust system insecure fouling rear brake caliper (6.1.2 (a))

Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Headlamp aim too high and too far to the right (4.1.2 (a))

Nearside Rear Footrest missing (6.2.12 (a))

Offside Rear Footrest missing (6.2.12 (a))

Rear Brake master cylinder defective but brake still operating plunger rod incorrectly located (1.1.10 (b) (i))

Rear Brake pedal insecure locking device missing (1.1.2 (e) (i))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Throttle control functioning such that safe operation of the motorcycle is adversely affected cable incorrectly routed (6.2.7 (a) (ii)) DANGEROUS

Drive chain slightly tight links (6.1.7 (k) (i))

Offside chain adjuster broken

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Offside Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Drive chain worn to excess (6.2.1e)

Headlamp aim too high (1.6)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Offside Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Wheel alignment slightly misaligned. (2.5.1)

Dipswitch does not deflect the main beam/s, making them into dipped beam/s switch getting stuck on main beam (1.2.2b(ii))

Drive chain slightly loose (6.2.1d)