2004 Ford Galaxy

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced chassie leg (6.1.1 (c) (i))

Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i))

Offside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Macpherson strut damaged and seriously weakened (5.3.3 (b) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sills (7.1.1 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Front registration plate deteriorated (6.3.1d)

Nearside Front Seat belt anchorage prescribed area is excessively corroded SILL AREA HOLED AND CORRODED AT SEAT MOUNTING (5.2.6)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Rear registration plate deteriorated (6.3.1d)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Brake pipe slightly corroded all nsf and osf (3.6.B.2c)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Tyre worn close to the legal limit nsr and osr (4.1.E.1)

registration plate deteriorated but not likely to be misread front and rear (6.3.1d)

Battery insecure (1.9.1)

Front Brake pipe slightly corroded all nsf and osf (3.6.B.2c)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Tyre worn close to the legal limit nsr and osr (4.1.E.1)

registration plate deteriorated but not likely to be misread front and rear (6.3.1d)

Offside Rear rear brake fluctuating, but not excessively (3.7.B.3)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.A.3)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear rear brake fluctuating, but not excessively (3.7.B.3)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Battery insecure (1.9.1)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

brake pad warning light on

exhaust in poor condition

offside rear brake slightly binding

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Passenger seat(s) missing at time of test

brake pad warning on

Battery insecure (1.9.1)

Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.A.3)

Offside Front Electrical wiring damaged and bare wires exposed (1.9.2c)

Offside Rear Electrical wiring inadequately supported (1.9.2a)

Child seat fitted not allowing full inspection of adult belt

Engine covers fitted obscuring some components in the engine bay

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Passenger seat(s) missing at time of test

battery was flat had to boost car to start test

Nearside Rear Rear position lamp(s) excessively damaged so that it is not visible from a reasonable distance (1.1.A.3d)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear rear brake binding (3.7.B.1)

Parking brake: efficiency below requirements (3.7.B.7)

Child seat fitted not allowing full inspection of adult belt

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Passenger seat(s) missing at time of test

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside front brake juddering slightly (3.7.A.2b)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside front brake juddering slightly (3.7.A.2b)

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Inner Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)