2002 Mitsubishi Shogun

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front passenger door does not latch securely closed trim insecure (6.2.3 (a))

Nearside Position lamp showing white light to the rear (4.2.3 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Oil leaking excessively from engine (8.4.1 (a) (i))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Brake pipes & other suspension items covered in underseal.

Front Bumper mountings corroded but not likely to become detached corrosion to outer parts of support bar. (6.1.4 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))

Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Rear Upper Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge 2mm in measured area smooth on inner edge. (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Stop lamp(s) slightly affected by the operation of another lamp (4.3.3 (b))

Rear Passenger seat(s) missing at time of test Both 3rd row ()

Sill covers & under trays fitted not allowing full inspection of some testable items.

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Central Stop lamp(s) with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength On inner wing panel front & rear of suspension top mount. (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is inadequately repaired Looks like the weld has blown a hole on top of the lower patch in the front of arch. (5.3.6 (a) (i))

Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded Inner wing (1.1.21 (e) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength On inner wing panel front & rear of suspension top mount. (5.3.6 (a) (i))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Brake pipes & other suspension items covered in underseal.

Front Bumper mountings corroded but not likely to become detached corrosion to outer parts of support bar. (6.1.4 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))

Nearside Rear Upper Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge 2mm in measured area smooth on inner edge. (5.2.3 (e))

Rear Passenger seat(s) missing at time of test Both 3rd row ()

Sill covers & under trays fitted not allowing full inspection of some testable items.

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Nearside rear inner arch/sill area corroded, temp repair carried out.

Offside Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner arch (not within prescribed area of suspension mounting (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner arch shock mounting area (5.3.6 (a) (i))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch/sill area (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill area (5.3.6 (a) (i))

Nearside Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Offside Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner arch (not within prescribed area of suspension mounting (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner arch shock mounting area (5.3.6 (a) (i))

Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded inner wheel arch (3.6.C.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front wiper blade split

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Upper Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear tyre wearing on inner edge

various small stone-chips in windscreen

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front wiper blade split

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Upper Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear tyre wearing on inner edge

various small stone-chips in windscreen

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)

Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)

Offside Registration plate lamp not working (1.1.5c)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)