2008 Fiat Punto

Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength N/S & O/S (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

headlamp stalk has intermittent fault

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive shock mount (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive shock mount (5.3.6 (a) (i))

Rear subframe mount brackets rusty

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive shock mount (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive shock mount (5.3.6 (a) (i))

Rear subframe mount brackets rusty

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive shock (2.4.A.3)

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive shock (2.4.A.3)

Rear Sub-frame corroded but not seriously weakened mount brackets (2.4.G.1)

engine sump rusty

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

o/s/f tyre bald on inner edge.

rear exhaust silencer corroding.

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)