MOT Status
ExpiredMileage
144,131 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced VEHICLE HEVLEY UNDER SILLED (6.1.1 (c) (i))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced wing (6.1.1 (c) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced wing (6.1.1 (c) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Horn sound not in accordance with requirements two tone (7.7 (c))
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced boot floor (6.1.1 (c) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch not welded (6.1.1 (c) (i))
Nearside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced wing (6.1.1 (c) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced wing (6.1.1 (c) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Horn sound not in accordance with requirements (7.7 (c))
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced boot floor (6.1.1 (c) (i))
Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch x 2 (6.1.1 (c) (i))
Nearside Rear Position lamp showing red light to the front (4.2.3 (a) (ii))
Nearside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch x 2 (6.1.1 (c) (i))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch x 2 (6.1.1 (c) (i))
Offside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Rear Exhaust system insecure (6.1.2 (a))
Offside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Integral body structure is corroded but structural rigidity is not significantly reduced both front inner wings (6.1.1 (c) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Brake fluid close to minimum mark (1.1.10 (d) (ii))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Lower Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
both rear brakes binding slightly
general corrosion throughout vehicle structure
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is inadequately repaired inner wing expanding foam (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner sill panel (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is inadequately repaired outer sill panel (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is inadequately repaired wheel arch (2.4.A.3)
Nearside Steering rack gaiter split (2.2.D.2d)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded inner wing (2.4.A.3)
Offside Front Suspension component mounting prescribed area is inadequately repaired chassis outrigger (2.4.A.3)
Offside Front Suspension component mounting prescribed area is inadequately repaired inner wing expanding foam (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill panel (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is inadequately repaired outer sill panel (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is inadequately repaired wheel arch (2.4.A.3)
Both front brake discs badly pitted
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside front brake fluctuating, but not excessively (3.7.B.3)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Brake pipe excessively corroded going to hose (3.6.B.2c)
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded arch to strut mount (2.4.A.3)
Nearside Inner Suspension component mounting prescribed area is excessively corroded centre sill (2.4.A.3)
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear Rear position lamp(s) excessively damaged so that it is not visible from a reasonable distance lamp lens broken showing white light (1.1.A.3d)
Offside Front Brake pipe excessively corroded going to hose (3.6.B.2c)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Headlamp not working on main beam (1.7.5a)
Offside Front Inner Suspension component mounting prescribed area is excessively corroded arch at back corroded (2.4.A.3)
Offside Front Inner Suspension component mounting prescribed area is excessively corroded arch to front cross member holed and corroded (2.4.A.3)
Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded body/outrigger mount (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Front cross member looks very corroded what I can see of it
Nearside Rear Suspension arm has slight play in a pin/bush front bush (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit getting very close to limit (4.1.E.1)
Offside Rear Suspension arm has slight play in a pin/bush front arm bush (2.4.G.2)
Rear Inner arches getting very corroded but not holed yet
Rear boot seats removed at time of test
under side of truck corroding every where.
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front brake caliper leaking (3.6.A.1)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Direction indicator flashing more than 120 times a minute (1.4.A.2g)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Direction indicator flashing more than 120 times a minute (1.4.A.2g)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Lower Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Oil leak
Child seat fitted not allowing full inspection of adult belt
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Inner Rear Upper Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Upper Brake pipe excessively corroded (3.6.B.2c)
Child seat fitted not allowing full inspection of adult belt
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Child seat fitted not allowing full inspection of adult belt
Fuel pipe/s corroded
Nail in offside rear tyre
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Child seat fitted not allowing full inspection of adult belt
Fuel pipe/s corroded
Nail in offside rear tyre
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear brake disc slightly scored (3.5.1h)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear brake disc slightly scored (3.5.1h)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mitsubishi Shogun?
Based on 1,312,716 MOT tests across 114,900 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AA02 HOL is a 2002 Mitsubishi Shogun in Black with a 3,200cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 57.1%.
Across all 2002 Mitsubishi Shogun models, the average MOT pass rate is 72.2% with a typical mileage of 100,198 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mitsubishi Shogun fails its MOT is brake pipe excessively corroded, accounting for 75,153 recorded failures. If you're considering buying AA02 HOL, it's worth having these areas checked by a mechanic before committing.
The Mitsubishi Shogun typically stays on UK roads for around 37 years. At 24 years old, this Mitsubishi Shogun is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of AA02 HOL?
You can check the full history of AA02 HOL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AA02 HOL registered?
AA02 HOL is a 2002 Mitsubishi Shogun, first registered on 6 March 2002.
Is AA02 HOL safe to buy?
The MOT history for AA02 HOL shows 21 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AA02 HOL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AA02 HOL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.