1991 Toyota MR2

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill box section (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill section (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill box section (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill section (5.3.6 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim too low (4.1.2 (a))

Nearside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)

Offside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)

Offside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)

both outer sills at rear slighlty corroded

Front brake caliper has restricted free movement both (3.5.1k)

Windscreen wiper does not clear the windscreen effectively both (8.2.2)

both outer sills at rear slighlty corroded

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Road wheel with a slightly distorted bead rim (4.2.A.1a)

Shock absorber has a slightly reduced damping effect (2.7.5)

Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Exhaust system not adequately supported (7.1.1)

Nearside front brake binding (3.7.B.1)

Offside front brake binding (3.7.B.1)

Service brake: efficiency below requirements (3.7.B.7)

Road wheel with a slightly distorted bead rim (4.2.A.1a)

Shock absorber has a slightly reduced damping effect (2.7.5)

Tyre worn close to the legal limit (4.1.E.1)

Nearside Front front brake binding (3.7.B.1)

Rear rear brake juddering severely (3.7.A.5b)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Body insecure and dangerous to other road users (6.1.B.1b)

Nearside Front Headlamp aim beam image too far to the right (1.6.B4)

Nearside Front Side repeater insecure (1.4.A.2b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Brake hose twisted (3.6.B.4c)

Offside Front front brake binding (3.7.B.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear Rear fog lamp not working (1.3.2b)