1996 Mitsubishi Fto

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Vehicle structure has slight corrosion (6.1.A.1)

front bumper has a damage

nearside front fog lamp not working

offside front wing has a damag

Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear brake caliper leaking (3.6.A.1)

Offside Rear fog lamp not working (1.3.2b)

Offside Rear position lamp(s) not working (1.1.A.3b)

offside front wing has a damag

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

front bumper has a damage

nearside front fog lamp not working

Front Exhaust has a major leak of exhaust gases (7.1.2)

Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

Front registration plate missing (6.3.1a)

Horn not working (1.6.2a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Direction indicator insecure (1.4.A.2b)

Offside Front Road wheel badly damaged (4.2.A.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

Offside rear brake binding (3.7.B.1)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Front Power steering component(s) has slight seepage from a component (2.3.3b)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp aim too high (1.8)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

damage to offside front of vehicle

fuel cap rubber seal perished

fuel pipes corroded

nearside rear tyre tread destorted

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside rear brake recording little or no effort (3.7.B.5a)

Rear Exhaust system not adequately supported (7.1.1)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Road wheel slightly damaged (4.2.A.1a)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Rear registration plate with character(s) which are not the correct height (6.3.4a)

Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear wheel bearing has slight play (2.6.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Brake pad(s) wearing thin (3.5.1g)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brake pad(s) wearing thin (3.5.1g)