1984 Yamaha T80

Rear Brake lining(s) close to minimum limit (1.1.13 (a))

All direction indicators not working not flashing (4.4.1 (a) (ii))

Horn not working (7.7 (a) (ii))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

All direction indicators adversely affected by the operation of another lamp (4.4.3 (b))

Horn sound not in accordance with requirements (7.7 (c))

Stop lamp adversely affected by the operation of another lamp (4.3.3 (b))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

All direction indicators flashing less than 60 times a minute (4.4.4 (a))

Front Brake lining(s) close to minimum limit (1.1.13 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Rear position lamp deteriorated but function not impaired (1.1.1b)

Rear suspension slightly corroded swing arm (2.4.A.2d)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Rear position lamp deteriorated but function not impaired (1.1.1b)

Rear suspension slightly corroded swing arm (2.4.A.2d)

Rear wheel spindle securing nut locking device insecure (2.4.A.2b)

Rear Motorcycle structure slightly corroded (6.1.1a)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Motorcycle structure slightly corroded (6.1.1a)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear wheel spindle securing nut locking device missing split pin (2.4.A.2b)

Nearside Rear Direction indicator incorrect colour (1.5.1b)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Upper Motorcycle structure slightly corroded (6.1.1a)

Front Brake lever has inadequate reserve travel (3.1.3b)

Rear Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Nearside Rear Direction indicator not working (1.5.1c)

rear tyre side walls cracking

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

front tyre side walls cracking