1989 Mercedes-benz 410

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Windscreen wiper not working (3.4 (a))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Lower Body panel insecure (6.2.1 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Lower Leaf spring to axle fixing bolt insecure SHACKLE BOLT (5.3.1 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Brake master cylinder close to minimum mark (1.1.10 (d) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Exhaust mounting defective (6.1.2 (a))

Offside Driver's view to the front outside the swept area of the windscreen wipers restricted by an obstruction (3.1 (a) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Brake master cylinder close to minimum mark (1.1.10 (d) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Exhaust mounting defective (6.1.2 (a))

Offside Driver's view to the front outside the swept area of the windscreen wipers restricted by an obstruction (3.1 (a) (i))

Offside Headlamp aim too high (4.1.2 (a))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Electrical wiring insecure and in contact with sharp edges (4.11 (a) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim too high (4.1.2 (a))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Floor not fully secure (6.2.4 (a) (i))

Offside Rear Floor not fully secure (6.2.4 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Fuel system component leaking (6.1.3 (b) (i))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Speedometer cannot be illuminated (7.8 (c) (ii))

Nearside Rear Floor not fully secure (6.2.4 (a) (i))

Offside Rear Floor not fully secure (6.2.4 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

rear wooden floor area showing signs off rot

tape fitted to head lamps

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Offside Ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

rear wooden floor area showing signs off rot

tape fitted to head lamps

Power steering component(s) leaking steeringbox (2.3.3b)

rear brake application uneven (3.7.B.2)

Headlamp masks/converters fitted

Brake load sensing valve defective and function impaired (3.6.E.3)

Brake load sensing valve linkage defective and function impaired (3.6.E.3)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Front Brake hose bulging under pressure (3.6.B.3)

Nearside Headlamp aim beam image kick up to the offside (1.8)

Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Headlamp aim beam image kick up to the offside (1.8)

Offside Headlamp aim too low (1.8)

Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Seat belt insecurely fixed to the vehicles structure (5.2.1a)

Steering box has a significant oil leak (2.2.D.2e)

Headlamp masks/converters fitted

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Front Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Rear Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Registration plate lamp not working (1.1.C.1d)

Headlamp masks/converters fitted

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)