MOT Status
ExpiredMileage
76,355 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
bonnet stay rod loose
corrosion; floor pans, various susp comps
exh deteriorating & slightly loud
front & rear brake imb slightly high
fuel pipe corroding
n/s h/lamp aim on upper limit
rear brake pipes corroding
reverse lights n/w
slight oil leak
Offside Steering rack gaiter split (2.2.D.2d)
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
bonnet stay rod loose
corrosion; floor pans, various susp comps
exh deteriorating & slightly loud
front & rear brake imb slightly high
fuel pipe corroding
n/s h/lamp aim on upper limit
rear brake pipes corroding
reverse lights n/w
slight oil leak
Engine oil leak
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Rear silencer mount broken
Reverse lamps inoperative
Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)
Offside Front constant velocity joint gaiter split (2.5.C.1a)
Engine oil leak
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Rear silencer mount broken
Reverse lamps inoperative
n/s/f top suspension arm slight wear
rear seat belt lower mount point behind rear seat( restricted inspection )
reverse lights not working
weld repairs carried out in varioue places
Driver's seat cannot be secured in the upright position. (6.2.A.2)
Nearside Front Passenger's seat cannot be secured in the upright position. (6.2.A.2)
Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
Offside Headlamp insecure (1.7.3)
Offside Rear rear brake recording little or no effort (3.7.B.5a)
rear brake application uneven (3.7.B.2)
rear brakes release unevenly (3.7.B.4)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
rear seat belt lower mount point behind rear seat( restricted inspection )
reverse lights not working
weld repairs carried out in varioue places
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too low (1.8)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside rear brake recording little or no effort (3.7.B.5a)
50 spots of corrosion
Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
50 spots of corrosion
Nearside Front Headlamp aim too low (1.8)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Poor repair and lots of filler in and around mountings of front subframe
Rear number plate marked through lettering
Steering system slightly tight (2.2.D.1)
front brake juddering slightly (3.7.A.2b)
Exhaust emissions hydrocarbon content excessive (7.3.B.1b)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Nearside Headlamp aim too low (1.8)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Offside Headlamp aim too low (1.8)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
rear brake application uneven (3.7.B.2)
Corrosion in boot floor and arch
Filler and poor repairs front mountings front subframe
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear number plate marked through lettering
Steering system slightly tight (2.2.D.1)
front brake juddering slightly (3.7.A.2b)
How Reliable is the Austin Mini 1000 City E?
Based on 44,703 MOT tests across 5,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
A352 JNX is a 1984 Austin Mini 1000 City E in Blue with a 998cc petrol engine. This vehicle has been through 12 MOT tests with a personal pass rate of 50%.
Across all 1984 Austin Mini 1000 City E models, the average MOT pass rate is 65.9% with a typical mileage of 50,606 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Austin Mini 1000 City E fails its MOT is subframe mounting prescribed area is excessively corroded, accounting for 3,881 recorded failures. If you're considering buying A352 JNX, it's worth having these areas checked by a mechanic before committing.
The Austin Mini 1000 City E typically stays on UK roads for around 44 years. At 42 years old, this Austin Mini 1000 City E is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of A352 JNX?
You can check the full history of A352 JNX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was A352 JNX registered?
A352 JNX is a 1984 Austin Mini 1000 City E, first registered on 14 January 1984.
Is A352 JNX safe to buy?
The MOT history for A352 JNX shows 12 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does A352 JNX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on A352 JNX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.