2008 Toyota Corolla

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both (5.1.2 (b) (i))

front to rear underbody/suspension components slightly corroded

Front Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both (5.1.2 (b) (i))

front to rear underbody/suspension components slightly corroded

both rear axle bushes slightly deteriorated

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Horn not working (7.7 (a))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Hydraulic brake calliper insecurely mounted (1.1.16 (c) (i))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Exhaust system insecure (6.1.2 (a))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

both rear axle bushes slightly deteriorated

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge Worn In Inner Edges (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Tyre worn close to legal limit/worn on edge Worn In Inner Edges (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Drive shaft joint worn, but not excessively (6.1.7 (c) (i))

Offside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Axle (6.1.1 (c) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Drive shaft joint worn, but not excessively (6.1.7 (c) (i))

Offside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Axle (6.1.1 (c) (i))

Registration plate incorrect Front & Rear Spacing incorrect (0.1 (c))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp insecure (1.7.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Registration plate lamp not working (1.1.C.1d)

Child seat fitted not allowing full inspection of adult belt

both rear tyres wearing on edges

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Brake pad(s) wearing thin (3.5.1g)

both rear tyres wearing on inner edges

rear seat belts not tested - seats not in position