1984 Yamaha SR125

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Steering movement slightly 'notchy' (2.2.1a)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Front Stop lamp remains on when the brake is released (1.3.1e)

Rear Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Drive chain sprocket worn to excess (6.2.1e)

Headlamp aim too high (1.6) DANGEROUS

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Steering movement slightly 'notchy' (2.2.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Rear position lamp missing (1.1.1a)

Steering movement slightly 'notchy' (2.2.1a)

Chain is rubbing on stand

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear wheel bearings have slight free play (2.4.A.2c)

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Nearside Front Direction indicators not working (1.5.1c)

Offside Rear Direction indicators not working (1.5.1c)

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear Front wheel bearings have slight free play (2.3.5b)

chain is rubbing on stand

Drive chain excessively loose (6.2.1d)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Offside Rear Direction indicator not working (1.5.1c)

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear wheel bearings have slight free play (2.4.A.2c)

Drive chain excessively loose (6.2.1d)

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Front wheel bearings have excessive free play (2.3.5b)

Headlamp aim too low and too far to the right. (1.6)

Offside Front Direction indicator insecure (1.5.3b)

Registration plate insecure (6.3.1b)

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear wheel bearings have slight free play (2.4.A.2c)

Drive chain worn but not considered excessive (6.2.1e)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Drive chain excessively tight (6.2.1d)

Front shock absorber seal failed and leaking oil (2.3.3)

Headlamp aim too low (1.6)

Nearside Front Direction indicator flashing less than 60 times a minute (1.5.1c)

Nearside Rear Direction indicator not working (1.5.1c)

Offside Direction indicator flashing less than 60 times a minute (1.5.1c)

Rear Brake reaction bracket insecure (3.2.A1j)

Stop lamp remains on when the brake is released (1.3.1e)

Drive chain worn but not considered excessive (6.2.1e)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Wheel alignment slightly misaligned. (2.5.1)

Front Front wheel spindle securing nut locking device insecure (2.3.5a)

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Drive chain fouling another component (6.2.1d)

Rear Front wheel spindle securing nut locking device insecure (2.3.5a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))