1995 Rover Mini

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Front Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Suspension component pin or bush slightly worn Trailing arm (5.3.4 (a) (i))

Offside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Suspension component pin or bush slightly worn Trailing arm (5.3.4 (a) (i))

Offside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Rear Exhaust system not adequately supported (7.1.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

near side sill is starting to rust

Nearside Front Headlamp aim too high (1.8)

Nearside Front Seat belt anchorage prescribed area is inadequately repaired (5.2.6)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Headlamp aim too high (1.8)

Offside Front Seat belt anchorage prescribed area is inadequately repaired (5.2.6)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

near side sill is starting to rust

Nearside Rear Trailing arm has slight play in a pin bearing (2.4.G.2)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Steering rack gaiter split (2.2.D.2d)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Parking brake: efficiency below requirements (3.7.B.7)

registration plate fitted to the rear does not have black characters on a yellow background (6.3.2b)

Fuel pipe/s corroded

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Suspension joint nearside lower dust cover split/missing

Suspension joint nearside upper dust cover split/missing

Suspension joint offside lower dust cover split/missing

Suspension joint offside upper dust cover split/missing