2002 Jaguar Xkr

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

general corrosion to underside of vehicle

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Rear subframe slight corrosion

Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Oil leak ()

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

front wipers starting to smear

n/s/r 285/30/20 tyre close to limit

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Headlamp masks/converters fitted

Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

movement in rear wheel bearings/suspension

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Headlamp masks/converters fitted

Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

engine oil low

movement in rear wheel bearings/suspension

offside front tyre wearing on inside edge and cut in side wall

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

n/s/f tyre badly perished

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

n/s/f tyre badly perished

Front Shock absorber has a light misting of oil (2.7.3)

Nail in nearside rear tyre

Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Shock absorber has a light misting of oil (2.7.3)

Nail in nearside rear tyre

Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Steering rack slightly corroded but serviceable (2.2.C.1d)

Offside Front Upper Suspension arm has excessive play in a track control arm inner bush (2.5.B.2b)

Nearside Front Shock absorber has a slightly worn bush (2.7.4)